{"title":"Hyundai Genesis Coupe","description":"\u003cp\u003eParts tagged for Hyundai Genesis Coupe fitment.\u003c\/p\u003e","products":[{"product_id":"fic-is190-1400h","title":"1400cc FIC Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set (High-Z) (is190-1400h)","description":"Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set: 4x1400cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic’s 1400cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1400cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1400cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e  \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522426605706,"sku":"is190-1400h_\u0026_PGTUSC4","price":819.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522426638474,"sku":"is190-1400h_\u0026_PADPUtoD4","price":864.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-10241835630662-39192301273158.png?v=1792519703"},{"product_id":"fic-is191-1400h","title":"1400cc FIC Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set (High-Z) (is191-1400h)","description":"Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set: 4x1400cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic’s 1400cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1400cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1400cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e  \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522426671242,"sku":"is191-1400h_\u0026_PGTUSC4","price":819.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522426704010,"sku":"is191-1400h_\u0026_PADPUtoD4","price":864.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-10241835499590-39182157905990.png?v=1792519704"},{"product_id":"fic-is191-2150h","title":"2150cc FIC Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set (High-Z) (is191-2150h)","description":"Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set: 4x2150cc Saturated \/ High Impedance Injectors. Largest high impedance injector ever! Drop-in fit for size and plug! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology.  DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003eData Match Technology\u003c\/strong\u003e  dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":50522509049994,"sku":"is191-2150h","price":1006.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319929926-32438565699654.jpg?v=1792520065"},{"product_id":"fic-is191-1650h","title":"1650cc FIC Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set (High-Z) (is191-1650h)","description":"Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set: 4x1650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTJETR4Q or add Plug \u0026amp; Play adaptors PADPJtoD4. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e  \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTJETR4Q)","offer_id":50522509115530,"sku":"is191-1650h_\u0026_PGTJETR4Q","price":914.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPJtoD4)","offer_id":50522509148298,"sku":"is191-1650h_\u0026_PADPJtoD4","price":959.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319897158-32438565535814.jpg?v=1792520065"},{"product_id":"fic-is191-1440h","title":"1440cc FIC Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set (High-Z) (is191-1440h)","description":"Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set: 4x1440cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e  \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522509181066,"sku":"is191-1440h_\u0026_PGTUSC4","price":819.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522509213834,"sku":"is191-1440h_\u0026_PADPUtoD4","price":864.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319831622-32438565470278.jpg?v=1792520065"},{"product_id":"fic-is191-1200h","title":"1200cc (Previously 1100cc) FIC Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set (High-Z) (is191-1200h)","description":"\u003cp\u003eHyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set: 4x1200cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes pigtails PGTJETR4Q or add Plug \u0026amp; Play adaptors PADPJtoD4. PREVIOUSLY IS191-1100H.\u003c\/p\u003e\n\u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTJETR4Q)","offer_id":50522509246602,"sku":"is191-1200h_\u0026_PGTJETR4Q","price":567.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPJtoD4)","offer_id":50522509279370,"sku":"is191-1200h_\u0026_PADPJtoD4","price":612.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319766086-32438565273670.jpg?v=1792520065"},{"product_id":"fic-is191-1000h","title":"1000cc FIC Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set (High-Z) (is191-1000h)","description":"Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set: 4x1000cc Modified Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e   \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522509312138,"sku":"is191-1000h_\u0026_PGTUSC4","price":457.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522509344906,"sku":"is191-1000h_\u0026_PADPUtoD4","price":502.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319733318-32438564978758.jpg?v=1792520065"},{"product_id":"fic-is191-0775h","title":"775cc FIC Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set (High-Z) (is191-0775h)","description":"Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set: 4x775cc Modified Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e   \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522509377674,"sku":"is191-0775h_\u0026_PGTUSC4","price":410.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522509410442,"sku":"is191-0775h_\u0026_PADPUtoD4","price":455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319700550-32438564716614.jpg?v=1792520065"},{"product_id":"fic-is191-0650h","title":"650cc FIC Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set (High-Z) (is191-0650h)","description":"Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set: 4x650cc Modified Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e   \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522509443210,"sku":"is191-0650h_\u0026_PGTUSC4","price":378.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522509475978,"sku":"is191-0650h_\u0026_PADPUtoD4","price":423.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319667782-32438564454470.jpg?v=1792520065"},{"product_id":"fic-is191-0525h","title":"525cc FIC Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set (High-Z) (is191-0525h)","description":"Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set: 4x525cc Modified Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e   \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522509508746,"sku":"is191-0525h_\u0026_PGTUSC4","price":352.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522509541514,"sku":"is191-0525h_\u0026_PADPUtoD4","price":397.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319635014-32438564126790.jpg?v=1792520066"},{"product_id":"fic-is191-0445h","title":"445cc FIC Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set (High-Z) (is191-0445h)","description":"Hyundai Genesis 2.0T (2013-2014) Fuel Injector Clinic Injector Set: 4x445cc Modified Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e   \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522509574282,"sku":"is191-0445h_\u0026_PGTUSC4","price":389.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522509607050,"sku":"is191-0445h_\u0026_PADPUtoD4","price":434.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319569478-32438563766342.jpg?v=1792520065"},{"product_id":"fic-is190-2150h","title":"2150cc FIC Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set (High-Z) (is190-2150h)","description":"Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set: 4x2150cc Saturated \/ High Impedance Injectors. Largest high impedance injector ever! Drop-in fit for size and plug! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology.  DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003eData Match Technology\u003c\/strong\u003e  dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":50522509803658,"sku":"is190-2150h","price":1006.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319536710-32438563438662.jpg?v=1792520071"},{"product_id":"fic-is190-1650h","title":"1650cc FIC Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set (High-Z) (is190-1650h)","description":"\u003cp\u003eHyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set: 4x1650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTJETR4Q or add Plug \u0026amp; Play adaptors PADPJtoD4.\u003c\/p\u003e\n\u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e\n\u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTJETR4Q)","offer_id":50522509836426,"sku":"is190-1650h_\u0026_PGTJETR4Q","price":914.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPJtoD4)","offer_id":50522509869194,"sku":"is190-1650h_\u0026_PADPJtoD4","price":959.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319503942-32438563242054.jpg?v=1792520071"},{"product_id":"fic-is190-1200h","title":"1200cc (Previously 1100cc) FIC Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set (High-Z) (is190-1200h)","description":"\u003cp\u003eHyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set: 4x1200cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes pigtails PGTJETR4Q or add Plug \u0026amp; Play adaptors PADPJtoD4. PREVIOUSLY IS190-1100H.\u003c\/p\u003e\n\u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTJETR4Q)","offer_id":50522509901962,"sku":"is190-1200h_\u0026_PGTJETR4Q","price":567.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPJtoD4)","offer_id":50522509934730,"sku":"is190-1200h_\u0026_PADPJtoD4","price":612.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319405638-32438562160710.jpg?v=1792520070"},{"product_id":"fic-is190-1440h","title":"1440cc FIC Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set (High-Z) (is190-1440h)","description":"Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set: 4x1440cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e  \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522509967498,"sku":"is190-1440h_\u0026_PGTUSC4","price":819.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522510000266,"sku":"is190-1440h_\u0026_PADPUtoD4","price":864.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319438406-32438562521158.jpg?v=1792520071"},{"product_id":"fic-is190-1000h","title":"1000cc FIC Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set (High-Z) (is190-1000h)","description":"\u003cp\u003eHyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set: 4x1000cc Modified Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4.\u003c\/p\u003e\n\u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522510033034,"sku":"is190-1000h_\u0026_PGTUSC4","price":457.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522510065802,"sku":"is190-1000h_\u0026_PADPUtoD4","price":502.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319372870-32438561865798.jpg?v=1792520070"},{"product_id":"fic-is190-0775h","title":"775cc FIC Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set (High-Z) (is190-0775h)","description":"Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set: 4x775cc Modified Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e   \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522510098570,"sku":"is190-0775h_\u0026_PGTUSC4","price":410.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522510131338,"sku":"is190-0775h_\u0026_PADPUtoD4","price":455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319307334-32438561669190.jpg?v=1792520070"},{"product_id":"fic-is190-0650h","title":"650cc FIC Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set (High-Z) (is190-0650h)","description":"Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set: 4x650cc Modified Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003eData Match Technology\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the  \u003cstrong\u003eData Match Sheet\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e   \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522510164106,"sku":"is190-0650h_\u0026_PGTUSC4","price":378.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522510196874,"sku":"is190-0650h_\u0026_PADPUtoD4","price":423.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319274566-32438561374278.jpg?v=1792520071"},{"product_id":"fic-is190-0445h","title":"445cc FIC Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set (High-Z) (is190-0445h)","description":"Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set: 4x445cc Modified Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e   \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522510229642,"sku":"is190-0445h_\u0026_PGTUSC4","price":389.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522510262410,"sku":"is190-0445h_\u0026_PADPUtoD4","price":434.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319209030-32438560882758.jpg?v=1792520071"},{"product_id":"fic-is190-0525h","title":"525cc FIC Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set (High-Z) (is190-0525h)","description":"Hyundai Genesis 2.0T (2010-2012) Fuel Injector Clinic Injector Set: 4x525cc Modified Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e   \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Solder in Pigtails (PGTUSC4)","offer_id":50522510295178,"sku":"is190-0525h_\u0026_PGTUSC4","price":352.0,"currency_code":"USD","in_stock":true},{"title":"Plug And Play Adapter to Stock Harness (PADPUtoD4)","offer_id":50522510327946,"sku":"is190-0525h_\u0026_PADPUtoD4","price":397.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/fic-7693319241798-32438561079366.jpg?v=1792520071"},{"product_id":"deatschwerks-9-437-1062","title":"2013-14 Hyundai Genesis Coupe 2.0T, 2013-16 3.8 R-Spec, DW430c, 430LPH","description":"DW430c, 430lph compact fuel pump for 2013-14 Hyundai Genesis Coupe 2.0T, 2013-16 3.8R-Spec","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522651295882,"sku":"9-437-1062","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-8794133004529-43255908204785.jpg?v=1792520754"},{"product_id":"deatschwerks-9-421s-1003","title":"DW420 Fuel pump for Genesis Coupe\/Sedan","description":"DW420 series, 420lph in-tank fuel pump w\/ install kit for 2009-12 Genesis Coupe (2.0T and 3.8V6), 2009-14 Genesis (3.8V6, 4.6, and 5.0) and 10-15 Kia Forte","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522666598538,"sku":"9-421s-1003","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-8041844113649-43152053502193.jpg?v=1792520805"},{"product_id":"deatschwerks-9-1062","title":"DW300C Install kit for Genesis Coupe","description":"Install Kit for DW300C for 2013-14 Hyundai Genesis Coupe 2.0T, 2013-16 3.8R-Spec","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522668564618,"sku":"9-1062","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898862125297-43154006311153.jpg?v=1792520812"},{"product_id":"deatschwerks-9-301s-1003","title":"DW300 Fuel pump for Genesis Coupe\/Sedan","description":"DW300 series, 340lph in-tank fuel pump w\/ install kit for 2009-12 Genesis Coupe (2.0T and 3.8V6), 2009-14 Genesis (3.8V6, 4.6, and 5.0) and 10-15 Kia Forte","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522694615178,"sku":"9-301S-1003","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7899725627633-43152687956209.jpg?v=1792520912"},{"product_id":"deatschwerks-9-307-1062","title":"DW300C Fuel pump for Genesis Coupe","description":"DW300C Series, 340lph compact fuel pump w\/ install kit for 2013-14 Hyundai Genesis Coupe 2.0T, 2013-16 3.8R-Spec","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522701398154,"sku":"9-307-1062","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898865533169-43151704260849.jpg?v=1792520946"},{"product_id":"deatschwerks-9-201s-1003","title":"DW200 Fuel pump for Genesis Coupe\/Sedan","description":"DW200 series, 255lph in-tank fuel pump w\/ install kit for 2009-12 Genesis Coupe (2.0T and 3.8V6), 2009-14 Genesis (3.8V6, 4.6, and 5.0) and 10-15 Kia Forte","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522703691914,"sku":"9-201S-1003","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898863436017-43153902043377.jpg?v=1792520954"},{"product_id":"deatschwerks-16mx-06-1200-4","title":"1200cc - Genesis Coupe 2.0T","description":"Matched set of 4 Bosch EV14 1200cc Injectors for Hyundai Genesis Coupe 2.0T 2009-2012","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522710245514,"sku":"16MX-06-1200-4","price":569.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898820641009-43158139764977.jpg?v=1792520973"},{"product_id":"deatschwerks-16m-06-1500-4","title":"1500cc - Genesis Coupe 2.0T","description":"Matched set of 4 Bosch EV14 1500cc Injectors for Hyundai Genesis Coupe 2.0T 2009-2012","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522711949450,"sku":"16M-06-1500-4","price":859.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898819264753-43158210871537.jpg?v=1792520985"},{"product_id":"deatschwerks-35u-00-0800-6","title":"800cc - Hyundai Genesis Coupe 3.8 2009-2012","description":"Matched set of 6 800cc Injectors for Hyundai Genesis Coupe 3.8 2009-2012","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522721812618,"sku":"35U-00-0800-6","price":519.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898830635249-43157877391601.jpg?v=1792521022"},{"product_id":"deatschwerks-35u-00-0600-6","title":"600cc - Hyundai Genesis Coupe 3.8 2009-2012","description":"Matched set of 6 600cc Injectors for Hyundai Genesis Coupe 3.8 2009-2012","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522721845386,"sku":"35U-00-0600-6","price":519.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898830569713-43157877850353.jpg?v=1792521022"},{"product_id":"deatschwerks-21s-06-0550-4","title":"550cc - Genesis Coupe 2.0T","description":"Matched set of 4 550cc Injectors for Hyundai Genesis Coupe 2.0T 2009-2012","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522721976458,"sku":"21S-06-0550-4","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898830307569-43157880242417.jpg?v=1792521022"},{"product_id":"deatschwerks-18u-06-0800-4","title":"800cc - Genesis Coupe 2.0T","description":"Matched set of 4 800cc Injectors for Hyundai Genesis Coupe 2.0T 2013-14","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522722828426,"sku":"18U-06-0800-4","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898829029617-43157905441009.jpg?v=1792521023"},{"product_id":"deatschwerks-18u-06-1000-4","title":"1000cc - Genesis Coupe 2.0T","description":"Matched set of 4 1000cc Injectors for Hyundai Genesis Coupe 2.0T 2013-14","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522722893962,"sku":"18U-06-1000-4","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898829062385-43157904916721.jpg?v=1792521024"},{"product_id":"deatschwerks-17u-06-0750-4","title":"750cc - Genesis Coupe 2.0T","description":"Matched set of 4 750cc Injectors for Hyundai Genesis Coupe 2.0T 2009-2012","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522725253258,"sku":"17U-06-0750-4","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898789413105-43158354395377.jpg?v=1792521037"},{"product_id":"deatschwerks-17u-06-1000-4","title":"1000cc - Genesis Coupe 2.0T, Subaru 2.5RS, Sentra QG18DE\/QR25DE","description":"Matched set of 4 1000cc Injectors for Hyundai Genesis Coupe 2.0T 2009-2012,  Subaru 2.5RS 99-03, Sentra QG18DE 00-06, Sentra QR25DE 02-12","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":50522725220490,"sku":"17U-06-1000-4","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/dw-7898789314801-43158357082353.jpg?v=1792521037"},{"product_id":"brian-crower-b-bc6508-b-hyundai-genesis-v6-g6da-proh625-connecting-rods-w-arp-custom-age-625-fasteners","title":"BC6508 - Hyundai Genesis V6 G6DA - ProH625+ Connecting Rods w\/ARP Custom Age 625+ Fasteners","description":"\u003cp\u003eBC6508 - Hyundai Genesis V6 G6DA - ProH625+ Connecting Rods w\/ARP Custom Age 625+ Fasteners\u003c\/p\u003e\u003cp\u003eManufacturer part number: BC6508.\u003c\/p\u003e\u003ctable style=\"background-color: 1px solid #cccccc; width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eC-to-C\u003c\/td\u003e\n\u003ctd\u003e5.886\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eBE Bore\u003c\/td\u003e\n\u003ctd\u003e2.283\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eBE Width\u003c\/td\u003e\n\u003ctd\u003e0.821\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003ePE Bore\u003c\/td\u003e\n\u003ctd\u003e0.866\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003ePE Width\u003c\/td\u003e\n\u003ctd\u003e0.821\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eGram Wt\u003c\/td\u003e\n\u003ctd\u003e561\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eTorque Specs\u003c\/td\u003e\n\u003ctd\u003e65-70 ft lbs - 3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eConfirm engine application, dimensions and any required machining before ordering. See \u003ca href=\"https:\/\/store.briancrower.com\/products\/b-bc6508-b-hyundai-genesis-v6-g6da-proh625-connecting-rods-w-arp-custom-age-625-fasteners\"\u003emanufacturer specifications and installation requirements\u003c\/a\u003e.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"Default Title","offer_id":50561086324874,"sku":"BC6508","price":1471.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/hbeam_fb6aa2ea-6bb4-4eca-8caa-1da0f93e0a78.jpg?v=1792877786"},{"product_id":"brian-crower-b-bc6509-b-hyundai-genesis-v6-g6da-proh2k-connecting-rods-w-arp2000-fasteners","title":"BC6509 - Hyundai Genesis V6 G6DA - ProH2K Connecting Rods w\/ARP2000 Fasteners","description":"\u003cp\u003eBC6509 - Hyundai Genesis V6 G6DA - ProH2K Connecting Rods w\/ARP2000 Fasteners\u003c\/p\u003e\u003cp\u003eManufacturer part number: BC6509.\u003c\/p\u003e\u003ctable style=\"background-color: 1px solid #cccccc; width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eC-to-C\u003c\/td\u003e\n\u003ctd\u003e5.886\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eBE Bore\u003c\/td\u003e\n\u003ctd\u003e2.283\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eBE Width\u003c\/td\u003e\n\u003ctd\u003e0.821\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003ePE Bore\u003c\/td\u003e\n\u003ctd\u003e0.866\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003ePE Width\u003c\/td\u003e\n\u003ctd\u003e0.821\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eGram Wt\u003c\/td\u003e\n\u003ctd\u003e560\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eTorque Specs\u003c\/td\u003e\n\u003ctd\u003e50-55 ft lbs - 3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eConfirm engine application, dimensions and any required machining before ordering. See \u003ca href=\"https:\/\/store.briancrower.com\/products\/b-bc6509-b-hyundai-genesis-v6-g6da-proh2k-connecting-rods-w-arp2000-fasteners\"\u003emanufacturer specifications and installation requirements\u003c\/a\u003e.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"Default Title","offer_id":50561086357642,"sku":"BC6509","price":985.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/hbeam_24e4a93d-7ed1-4556-8bbd-adbe52e1d1fe.jpg?v=1792877786"},{"product_id":"brian-crower-bc2130-1","title":"BC2130-1 - Titanium Retainer - (Mitsubishi 4B11T Evo X, Hyundai G4KF Genesis) - 1 only","description":"\u003cp\u003eBC2130-1 - Titanium Retainer - (Mitsubishi 4B11T Evo X, Hyundai G4KF Genesis) - 1 only\u003c\/p\u003e\u003cp\u003eManufacturer part number: BC2130-1.\u003c\/p\u003e\u003ctable style=\"background-color: 1px solid #cccccc; width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eStem\u003c\/td\u003e\n\u003ctd\u003e5.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eO.D.\u003c\/td\u003e\n\u003ctd\u003e0.910\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eStep 1\u003c\/td\u003e\n\u003ctd\u003e0.667\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eStep 2\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eInst Ht\u003c\/td\u003e\n\u003ctd\u003eStock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eGram Wt\u003c\/td\u003e\n\u003ctd\u003e5.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eConfirm engine application, dimensions and any required machining before ordering. See \u003ca href=\"https:\/\/store.briancrower.com\/products\/bc2130-1\"\u003emanufacturer specifications and installation requirements\u003c\/a\u003e.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"Default Title","offer_id":50561112801418,"sku":"BC2130-1","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/BC2130.jpg?v=1792877897"},{"product_id":"brian-crower-copy-of-valve-springs-dual-supertech-mitsubishi-4g63-eclipse-evo","title":"BC1130-1 - Valve Spring - Single (Mitsubishi 4B11T Evo X, Hyundai G4KF Genesis) - 1 only","description":"\u003cp\u003eBC1130-1 - Valve Spring - Single (Mitsubishi 4B11T Evo X, Hyundai G4KF Genesis) - 1 only\u003c\/p\u003e\u003cp\u003eManufacturer part number: BC1130-1.\u003c\/p\u003e\u003ctable style=\"background-color: 1px solid #cccccc; width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eType\u003c\/td\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eFree Length\u003c\/td\u003e\n\u003ctd\u003e1.693\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eO.D.\/I.D. Outer\u003c\/td\u003e\n\u003ctd\u003e0.960\" \/ 0.675\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eO.D.\/I.D. Inner\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eSeat\u003c\/td\u003e\n\u003ctd\u003e1.375\" @ 75 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eOpen\u003c\/td\u003e\n\u003ctd\u003e0.950\" @ 175 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eCoil Bind\u003c\/td\u003e\n\u003ctd\u003e0.850\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eRetainer\u003c\/td\u003e\n\u003ctd\u003eBC2130, OEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eSpring Seat\u003c\/td\u003e\n\u003ctd\u003eOEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#FFFFFF\"\u003e\n\u003ctd align=\"right\"\u003eNet Cam Lift\u003c\/td\u003e\n\u003ctd\u003e0.475\" \/ 12.06mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eConfirm engine application, dimensions and any required machining before ordering. See \u003ca href=\"https:\/\/store.briancrower.com\/products\/copy-of-valve-springs-dual-supertech-mitsubishi-4g63-eclipse-evo\"\u003emanufacturer specifications and installation requirements\u003c\/a\u003e.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"Default Title","offer_id":50561113948298,"sku":"BC1130-1","price":9.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/6166\/1322\/files\/BC1130.jpg?v=1792877911"}],"url":"https:\/\/alteredms.com\/collections\/hyundai-genesis-coupe.oembed","provider":"Altered Motorsports","version":"1.0","type":"link"}